Latest slack adjuster Tenders | Government slack adjuster Tenders

State Government

CTN :43669573

13 Feb, 2026 2.24 Crore

Kota - Rajasthan

Tender For corrigendum : mdr 252 to fatehpurkhushk - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), kilometre stone reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 ordinary kil

CTN :43680517

09 Feb, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of field coil main d d -field coil main , solenoid switch , socket electrical fixed 4 pole , oil filter , fuel filter , lub oil filter , diode forward 70a , doide revrese 70a , metalic bushes for self starter , clutch assy self starter , pipe flexible pin braided , pipe flexible for fuel inlet , nozzle injector , element , brg tapper roller

CTN :43884645

16 Feb, 2026 NA

Dehradun - Uttarakhand

Tender For supply of s a of fuel feed pump to filter , speedometer cable , valve for feed pump assy valve , cyl assy hydraulic brk wheel , rep kit for wheel cyl , spark plug , bearing frt wheel , s a of wiper arm and blade , blade assy wiper , assy wiper blade , solenoid valve , drive assy , gear shift lever assy with bushes , rope wire steel 8 mm dia 8 mtrs long , wiper motor wiper motor rhd charge

Central Government / Public Sector

CTN :43888006

19 Feb, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For tender enquiry for hiring of back hoe loader (jcb) to remove wild growth, bushes etc., in oft, trich

Central Government / Public Sector

CTN :43888011

19 Feb, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For tender enquery for uprooting and removing of throny bushes/shrubs and seemai karuvelam trees and procuring the same on per kg basis from oft

CTN :43889078

12 Feb, 2026 NA

Multi City - Jharkhand

Tender For auction sale of rolling stock - sc. cut off parts of accidental involved cond. wagon, type- boxnhl [stainless steel body], 1] wcr 22161065162. condition-sold without excluded fittings as available vide crse-er-kkk letter no.mc-300-pt.-xviii dt.26.08.14, list of excluded fittings are as follows, 1] casnub bogie, 2] wheel set with ctrb, 3] brake cylinder, 4] draft gear 5] coupler body, 6] yoke and yoke pin, 7] distributor valve, 8] yoke support plate, 9] yoke pin support plate, 10] all sorts of bolster spring, 11] slack adjustor [sab], 12] hand brake wheel, 13] knuckle, 14] anchor plate with safety plate, 15] brake beam complete for casnub bogie, 16] equalising lever with bushes, 17] bogie brake push rod, 18] apm. cutting allowed. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

CTN :43889099

13 Feb, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc, bcnm1, boxnr, bobrnm1 & boxnm1 wagons no as following: [1] ner 85040300259 bvzc [2] scr 30099060418 bcnm1 [3] ser 30079066607 bcnm1 [4] scr 30099060623 bcnm1 [5] ser 10079647716 boxnr [6] er 72029460059 bobrnm1 [7] ser 25079762079 boxnr [8] wr 10089761822 boxnm1 [9] er 10029660376 boxnm1 [10] ser 10079765090 boxnm1. condition:-[1] cutting is allowed for loading facilities only. [2] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [3] to be sold without all available excluded fittings as follows:- (i) for bvzc : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iv) sl no. 04 is fitted with 22w(m) casnub bogie which is to be sold with wagon.

CTN :43889100

13 Feb, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1 & boxnr wagons no as following: [1] scr 10099661891 boxnm1 [2] ser 25079662324 boxnr [3] ser 10079661316 boxnm1 [4] ser 25079762543 boxnr [5] er 10029661267 boxnm1 [6] er 10029661380 boxnm1 [7] scr 10099561702 boxnm1 [8] scr 10099638121 boxnm1 [9] scr 10099635106 boxnm1. condition:-[1] cutting is allowed for loading facilities only. [2] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [3] to be sold without all available excluded fittings as follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 05 is fitted with 22w(m) casnub bogie which is to be sold with wagon. "

CTN :43889101

13 Feb, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

CTN :43889102

13 Feb, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

Slack Adjuster Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government / Public Sector